P series plastic splicer maintenance and maintenance

maintenance

1. The plastic splicer must be operated and maintained by a special person.

2, the plastic splicing machine should pay attention to the following matters during the use:

(1) It is strictly forbidden to use in flammable and explosive places

(2) The power plug must be unplugged when the person leaves or does not work, and the air

source is removed.

(3) Regularly refueling in the pneumatic three-piece oil cup, only sewing machine oil or transformer oil can be added.

(4) The regulating valve and throttle valve in the gas path must not be adjusted arbitrarily, otherwise it will affect the normal use of the equipment.

Precautions

1. Be sure to read the instruction manual before operation.

2. It is strictly forbidden to place your hand in the middle of the table and below the platen.

3, knife rise, knife drop button can not be pressed freely to prevent the knife from

being damaged

4. When the operation is completed, the equipment should be in the state of pressure relief and the air source switch should be cut off.

5. It is strictly forbidden to touch the heating knife and the melted workpiece during use to prevent burns from high temperature parts.

6, the equipment must be reliably grounded